The Blue Smart IP22 Charger is new professional battery charger with built-in Bluetooth, It can be used on devices in your workshop and on motor vehicles such as classic cars, motorbikes, boats & camper vans
The built -in Bluetooth gives the user a wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 25% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating - Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
Please Note: Some Victron Units are none stock items and may carry a lead time of around 3-5 days
All prices shown are exclusive of VAT
Supplied Individually
Specifications
- Operating Voltage range (AC): 180V - 265V
- DC output current ('normal' mode): 30A
- DC output current ('night' or 'low' mode): 15A
- DC output voltage: 12V
- Minimum battery capacity ('normal' mode): 60Ah
- Minimum battery capacity ('night' or 'low' mode): 30Ah
- Absorption charging voltage: 14.2V - 14.7V DC (depending on the battery type)
- Float charging voltage: 13.5V - 13.8V (depending on the battery type)
- Minimum battery voltage: starts charging at 0V ('dead battery')
- Efficiency: 93%
- Standby power consumption: 0.5W
- Operating temperature range: -20°C to 50°C
- Humidity (non condensing): Max 95%
- Temperature compensation: 16mV/°C
- Cooling: low rpm (silent) fan
- Protection: IP22 (indoor use)
- Dimensions: 235 x 108 x 65 mm
- Weight: 1.3 kg
